Prevailing wage rates · Montana · Wage determination
Prevailing wage rates: Missoula County, Montana
Heavy construction · MT20260067 modification 2, published May 18, 2026
The short answer
This sheet sets 21 classifications for heavy work in Missoula County, Montana. Each line is a basic hourly rate plus a fringe rate, and the sum is the minimum you must pay for that work, from $24.12 an hour (truck driver: dump truck) to $71.06 (boilermaker). Your contract may lock an earlier modification.
What changed this year
First published January 2, 2026, this sheet is now on modification 2, and its rates have changed in 2 modifications.
Latest change
May 18, 2026 · modification 2
Classification names reworded; 2 rates lowered among the 21 lines we could match
- Electrician: 1 rate lowered by $0.54 an hour
- Plumber: 1 rate lowered by $4.47 an hour
SAM.gov reworded this sheet’s classification names in this modification, so not every line can be matched to the one before. Only lines matched with certainty are compared here; nothing is guessed. If your trade is not listed, compare it against your contract’s copy.
Every line that changed (2)
| Classification | Was | Now | Change |
|---|---|---|---|
| ELECTRICIAN | $41.21 + $17.98 | $40.71 + $17.94 | −$0.54 (−0.9%) |
| PLUMBER | $42.80 + $17.28 | $39.38 + $16.23 | −$4.47 (−7.4%) |
Earlier modifications
January 30, 2026 · modification 12 rates raised
- Electrician: 1 rate raised by $0.54 an hour
- Plumber: 1 rate raised by $4.47 an hour
Every line that changed (2)
Classification Was Now Change ELECTRICIAN $40.71 + $17.94 $41.21 + $17.98 +$0.54 (+0.9%) PLUMBER $39.38 + $16.23 $42.80 + $17.28 +$4.47 (+8.0%)
Compared line by line from each modification as published on SAM.gov. A line we could not pair with certainty is left out rather than guessed.
Rates by classification
These are the rates in modification 2 as published on SAM.gov. The determination and modification written into your contract are the ones that bind you; check that number before relying on this table. Total is the basic rate plus the fringe. Source is the agreement or survey the rate came from and its year; a survey year long past means the rate has not been surveyed since. A marker means the group changed in this modification. In the Since column, a dash means SAM.gov reworded the line during the year and it cannot be matched to the first publication with certainty. A dagger (†) means the fringe carries a footnote or percentage the total does not include; read the group’s notes.
| Classification | Basic rate | Fringe | Total | Source |
|---|---|---|---|---|
| BOIL0011-003 · Boilermakers agreement, January 1, 2025 | ||||
| BOILERMAKER | $38.75 | $32.31 | $71.06 | Agreement, 2025 |
| CARP0028-011 · Carpenters agreement, June 1, 2024 | ||||
CARPENTER (INCLUDING FORMWORK). ZONE DEFINITION…Full textCARPENTER (INCLUDING FORMWORK). ZONE DEFINITION: THE HOURLY RATE APPLICABLE TO EACH PROJECT IS DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL ROUTE FROM THEC OUNTY COURTHOUSE OF THE FOLLOWING TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, LEWISTON, MILES CITY, AND MISSOULA. ZONE 1: 0 TO 30 MILES-BASE RATE. ZONE 2: 31 TO 60 MILES -$4.00. ZONE 3: OVER 60 MILESE - $6.00 | $36.49 | $14.33 | $50.82 | Agreement, 2024 |
| ELEC0768-009 · Electrical Workers (IBEW) agreement, June 1, 2025 | ||||
| ELECTRICIAN | $40.71 | $17.94 | $58.65 | Agreement, 2025 |
| ENGI0400-006 · Operating Engineers agreement, May 1, 2025 | ||||
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR:, ZONE 1: (7) CRANES, 150 TONS TO INCLUDING 250 TONS (ADD $1.00 FOR EVERY 100 TONS OVER 250 TONS); CRANE, STIFF-LEG OR DERRICK; HELICOPTER HOIST; CRANE, TOWER (ALL). ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $42.23 | $16.20 | $58.43 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (6)CRANES, 75 TONS TO AND INCL. 149 TONS; WHIRLEY CRANES. ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $41.15 | $16.20 | $57.35 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (5)CRANES, 45-74 TONS. ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $40.07 | $16.20 | $56.27 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (4)CRANES, 25-44 TONS. ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $38.98 | $16.20 | $55.18 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (3) MECHANIC, SCRAPER. ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $24.34 | $10.40 | $34.74 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (2) EXCAVATOR, CRANE OILER. ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $23.94 | $10.40 | $34.34 | Agreement, 2025 |
POWER EQUIPMENT OPERATOR…Full textPOWER EQUIPMENT OPERATOR: ZONE 1: (1) A-FRAME TRUCK CRANE, FORKLIFT, OILER (EXCEPT CRANE). ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS: THE ZONE HOURLY RATES APPLICABLE TO EACH PROJECT SHALL BE DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL MAINTAINED ROUTE FROM THE NEAREST COUNTY COURT HOUSE OF THE FOLLOWING LISTED TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, MISSOULA ZONE 1: 0 TO 30 MILES - BASE PAY ZONE 2: 30 TO 60 MILES - BASE PAY + $3.50 ZONE 3: OVER 60 MILES - BASE PAY + $5.50 | $23.47 | $10.40 | $33.87 | Agreement, 2025 |
| IRON0014-015 · Ironworkers agreement, January 1, 2024 | ||||
| IRONWORKER: REINFORCING AND STRUCTURAL | $32.08 | $29.06 | $61.14 | Agreement, 2024 |
| PLUM0459-010 · Plumbers and Pipefitters agreement, May 1, 2024 | ||||
| PLUMBER | $39.38 | $16.23 | $55.61 | Agreement, 2024 |
| SUMT2011-043 · Survey of contractors in MT, February 7, 2011 | ||||
| TRUCK DRIVER: DUMP TRUCK | $19.38 | $4.74 | $24.12 | Survey, 2011 |
| PAINTER: BRUSH AND SPRAY | $25.00 | $0.00 | $25.00 | Survey, 2011 |
| OPERATOR: LOADER (FRONT END) | $22.67 | $6.54 | $29.21 | Survey, 2011 |
| OPERATOR: BOBCAT/SKID STEER/SKID LOADER | $25.67 | $8.05 | $33.72 | Survey, 2011 |
| OPERATOR: BACKHOE | $22.12 | $8.37 | $30.49 | Survey, 2011 |
| OPERATOR: ASPHALT ROLLER | $22.39 | $3.96 | $26.35 | Survey, 2011 |
| LABORER: COMMON OR GENERAL | $16.91 | $9.08 | $25.99 | Survey, 2011 |
| TEAM0190-001 · Teamsters agreement, May 1, 2025 | ||||
TRUCK DRIVER (3) WATER TRUCK ZONE A. ZONE B…Full textTRUCK DRIVER (3) WATER TRUCK ZONE A. ZONE B (30-60 MILES FROM COUNTY COURTHOUSE OF LISTED CITIES*): ADD $3.05 PER HOUR TO ZONE A RATES ZONE C (OVER 60 MILES FROM COUNTY COURTHOUSE OF LISTED CITIES*): ADD $4.85 PER HOUR TO ZONE A RATES. *ZONE PAY WILL BE CALCULATED FROM THE CITY CENTER OF THE FOLLOWING LISTED CITIES: BILLINGS BOZEMAN BUTTE GREAT FALLS HELENA KALISPELL MISSOULA | $32.88 | $13.98 | $46.86 | Agreement, 2025 |
TRUCK DRIVER (2) WATER TRUCK ZONE A. ZONE B…Full textTRUCK DRIVER (2) WATER TRUCK ZONE A. ZONE B (30-60 MILES FROM COUNTY COURTHOUSE OF LISTED CITIES*): ADD $3.05 PER HOUR TO ZONE A RATES ZONE C (OVER 60 MILES FROM COUNTY COURTHOUSE OF LISTED CITIES*): ADD $4.85 PER HOUR TO ZONE A RATES. *ZONE PAY WILL BE CALCULATED FROM THE CITY CENTER OF THE FOLLOWING LISTED CITIES: BILLINGS BOZEMAN BUTTE GREAT FALLS HELENA KALISPELL MISSOULA | $32.88 | $13.98 | $46.86 | Agreement, 2025 |
Modification history
| Modification 1 | January 30, 2026 |
| Modification 2 | May 18, 2026 (current) |
Published by the Wage and Hour Division; read from sam.gov. The sheet is checked for a newer modification each day. Contracts awarded since January 1, 2017 also carry Executive Order 13706 paid sick leave (one hour per 30 worked, up to 56 a year).
Questions people ask
- Which rate do I pay on MT20260067?
- The line for the classification of work actually performed: the basic rate plus the fringe. You may pay the fringe into benefit plans, as cash on every hour, or a mix. Overtime after 40 hours is 1.5 times the basic rate; fringe is paid on every hour and never multiplied.
- My trade is not on this sheet. What do I do?
- Do not borrow the nearest name. Ask the contracting agency for a conformance on Standard Form 1444 before the first week of that work, and note it as pending on the payroll.
- Does modification 2 apply to my contract?
- Only if it was in force when your contract was awarded (generally at bid opening). An earlier modification locked into the contract keeps applying, except on option years, added scope and indefinite-quantity contracts. The number and modification are on the first page of the exhibit in your contract.
How to read a wage determination · Paying the fringe in cash or through plans · Overtime on these rates · Fringe credit calculator
Put these rates on a certified payroll.
Start here and MT20260067 is already filled in when you set up the job. CertifiedHours loads this sheet, checks every line against it as you type hours, and prints the WH-347. Free for one payroll a month.
Start a payroll on this sheetOn this sheet
- 21 classifications in 8 rate groups
- 7 from agreements, 1 from surveys
- Counties: Missoula